Crack Seal Services In American Fork, Utah
Hot-pour rubberized crack sealing that stops water infiltration and extends pavement life.
Download A Free Asphalt Seal Coat Timing Guide for Commercial Properties
When to seal, why the timing matters, how Utah's climate affects the schedule, and the cost math behind a 2-year maintenance cycle.
Crack Seal In American Fork, Utah
We perform hot-applied rubberized crack sealing on asphalt pavement for commercial parking lots, residential driveways, HOA communities, and private access roads. The process starts with routing — we cut a reservoir profile into cracks wider than about a quarter inch so the sealant has mechanical grip and flex room. Narrower cracks are cleaned out with a wire brush or blower. We then apply hot-pour rubberized sealant, which stays flexible through temperature cycles rather than cracking like cold-applied products. A properly sealed crack resists water infiltration for several years before it needs attention again. Crack sealing is most effective when done while the surrounding pavement is still in reasonably good condition — it is a maintenance tool, not a structural fix for pavement that has already failed.
Why American Fork Owners Choose Black Canyon Exteriors
American Fork's location at the mouth of American Fork Canyon means it receives channeled cold air drainage in winter that produces significantly more ice dam events than comparable-elevation properties elsewhere in Utah Valley. The 2000s-era residential expansion along the east bench — Meadow Way, Canyon Crest, Fox Hollow — includes many homes with architectural features like turrets, dormers, and complex rooflines that create multiple gutter valley intersections, each a potential failure point. The commercial corridor along Main Street and State Street has a mix of 1960s strip retail and newer mixed-use construction that presents the full range of siding and window replacement challenges.
We serve American Fork and nearby communities including Lehi, Pleasant Grove, Highland, and the American Fork Canyon corridor.
Free On-Site Estimate In American Fork
Tell us the property address — we will schedule a walk-through usually within a few business days.
Our Crack Seal Process
-
Crack inspection and mapping
We walk the pavement and identify cracks suitable for sealing — structural and alligatored areas are called out separately because they need repair, not sealing.
-
Cleaning and routing
Cracks are blown clear of debris. Cracks wide enough to route (generally 1/4 inch or wider) get a routed reservoir for better sealant adhesion and flexibility.
-
Hot-pour application
Hot-applied rubberized sealant is melted and applied directly into the crack, slightly overfilling to account for settling. Material is tooled flush with a squeegee.
-
Cure and traffic hold
Sealed cracks need roughly 30–60 minutes before foot traffic and a few hours before vehicle traffic depending on temperature. We coordinate timing with you.
Recent Crack Seal Work
Proudly Serving All Of Utah
We serve the Wasatch Front and beyond — from Salt Lake County to Utah County, Davis, Weber, Tooele, Summit, and surrounding communities.
- Salt Lake City
- West Jordan
- South Jordan
- Sandy
- Draper
- Provo
- Orem
- Lehi
- American Fork
- Ogden
- Layton
- Bountiful
- West Valley City
- Park City
- Tooele
Ready To Start Your American Fork Project?
Free, written, line-item estimate. No commitment required.
Get In Touch
Ready for a quote or have a question? We’re Utah-based, Utah-run, and we’ll come out to your property for a free on-site estimate.
Get A Free Quote