Crack Seal Services In Sandy, Utah
Hot-pour rubberized crack sealing that stops water infiltration and extends pavement life.
Download A Free Asphalt Seal Coat Timing Guide for Commercial Properties
When to seal, why the timing matters, how Utah's climate affects the schedule, and the cost math behind a 2-year maintenance cycle.
Crack Seal In Sandy, Utah
We perform hot-applied rubberized crack sealing on asphalt pavement for commercial parking lots, residential driveways, HOA communities, and private access roads. The process starts with routing — we cut a reservoir profile into cracks wider than about a quarter inch so the sealant has mechanical grip and flex room. Narrower cracks are cleaned out with a wire brush or blower. We then apply hot-pour rubberized sealant, which stays flexible through temperature cycles rather than cracking like cold-applied products. A properly sealed crack resists water infiltration for several years before it needs attention again. Crack sealing is most effective when done while the surrounding pavement is still in reasonably good condition — it is a maintenance tool, not a structural fix for pavement that has already failed.
Why Sandy Owners Choose Black Canyon Exteriors
Sandy homes above 4,500 feet face strong west winds, intense summer UV, and hail pockets that concentrate along the foothills. Many homes from the 1980s and 1990s in Willow Creek, Dimple Dell, and the bench neighborhoods still have original masonite or early-generation vinyl siding ready for replacement. We handle HOA color-match compliance on every project so your new siding fits the neighborhood.
We serve Sandy and surrounding South Salt Lake County including Draper, Midvale, and the Cottonwood Heights area.
Free On-Site Estimate In Sandy
Tell us the property address — we will schedule a walk-through usually within a few business days.
Our Crack Seal Process
-
Crack inspection and mapping
We walk the pavement and identify cracks suitable for sealing — structural and alligatored areas are called out separately because they need repair, not sealing.
-
Cleaning and routing
Cracks are blown clear of debris. Cracks wide enough to route (generally 1/4 inch or wider) get a routed reservoir for better sealant adhesion and flexibility.
-
Hot-pour application
Hot-applied rubberized sealant is melted and applied directly into the crack, slightly overfilling to account for settling. Material is tooled flush with a squeegee.
-
Cure and traffic hold
Sealed cracks need roughly 30–60 minutes before foot traffic and a few hours before vehicle traffic depending on temperature. We coordinate timing with you.
Recent Crack Seal Work
Proudly Serving All Of Utah
We serve the Wasatch Front and beyond — from Salt Lake County to Utah County, Davis, Weber, Tooele, Summit, and surrounding communities.
- Salt Lake City
- West Jordan
- South Jordan
- Sandy
- Draper
- Provo
- Orem
- Lehi
- American Fork
- Ogden
- Layton
- Bountiful
- West Valley City
- Park City
- Tooele
Ready To Start Your Sandy Project?
Free, written, line-item estimate. No commitment required.
Get In Touch
Ready for a quote or have a question? We’re Utah-based, Utah-run, and we’ll come out to your property for a free on-site estimate.
Get A Free Quote