Crack Seal Services In South Jordan, Utah

Hot-pour rubberized crack sealing that stops water infiltration and extends pavement life.

Crack seal repair applied to damaged pavement surface

Download A Free Asphalt Seal Coat Timing Guide for Commercial Properties

When to seal, why the timing matters, how Utah's climate affects the schedule, and the cost math behind a 2-year maintenance cycle.

Get Instant Access →

Crack Seal In South Jordan, Utah

We perform hot-applied rubberized crack sealing on asphalt pavement for commercial parking lots, residential driveways, HOA communities, and private access roads. The process starts with routing — we cut a reservoir profile into cracks wider than about a quarter inch so the sealant has mechanical grip and flex room. Narrower cracks are cleaned out with a wire brush or blower. We then apply hot-pour rubberized sealant, which stays flexible through temperature cycles rather than cracking like cold-applied products. A properly sealed crack resists water infiltration for several years before it needs attention again. Crack sealing is most effective when done while the surrounding pavement is still in reasonably good condition — it is a maintenance tool, not a structural fix for pavement that has already failed.

Why South Jordan Owners Choose Black Canyon Exteriors

South Jordan's Daybreak district and the surrounding newer construction present a different challenge than older neighborhoods — HOA covenants govern approved colors, materials, and even visible gutter profiles. We know the process for HOA submittals and can provide color samples and material specs in the formats most HOA review boards require. Larger new-build homes in Daybreak typically shed significant roof area into 6-inch gutters — we recommend upsizing on any home over 2,500 square feet here.

We serve South Jordan and nearby communities including Herriman, West Jordan, Riverton, and the Daybreak area.

Free On-Site Estimate In South Jordan

Tell us the property address — we will schedule a walk-through usually within a few business days.

Our Crack Seal Process

  1. Crack inspection and mapping

    We walk the pavement and identify cracks suitable for sealing — structural and alligatored areas are called out separately because they need repair, not sealing.

  2. Cleaning and routing

    Cracks are blown clear of debris. Cracks wide enough to route (generally 1/4 inch or wider) get a routed reservoir for better sealant adhesion and flexibility.

  3. Hot-pour application

    Hot-applied rubberized sealant is melted and applied directly into the crack, slightly overfilling to account for settling. Material is tooled flush with a squeegee.

  4. Cure and traffic hold

    Sealed cracks need roughly 30–60 minutes before foot traffic and a few hours before vehicle traffic depending on temperature. We coordinate timing with you.

Proudly Serving All Of Utah

We serve the Wasatch Front and beyond — from Salt Lake County to Utah County, Davis, Weber, Tooele, Summit, and surrounding communities.

  • Salt Lake City
  • West Jordan
  • South Jordan
  • Sandy
  • Draper
  • Provo
  • Orem
  • Lehi
  • American Fork
  • Ogden
  • Layton
  • Bountiful
  • West Valley City
  • Park City
  • Tooele
See Service Area →

Ready To Start Your South Jordan Project?

Free, written, line-item estimate. No commitment required.

Get In Touch

Ready for a quote or have a question? We’re Utah-based, Utah-run, and we’ll come out to your property for a free on-site estimate.

Get A Free Quote